skullbrain.org
http://skullbrain.org/legacy/

painting questions
http://skullbrain.org/legacy/viewtopic.php?f=19&t=15606		 Page 1 of 3
Author:  pickleloaf [ Thu Nov 08, 2007 6:34 am ]
Post subject:  painting questions
--when you have eyes that are part of the figure's sculpt, so you paint over them with a base coat then go back and apply v-color with a small brush? if so, is it hard to keep brush strokes out of the paint?

or would you mask the eyes if you wanted the color the same?

--if the figure has glued on eyes (like some RxH), do you remove the eyes for painting or mask them? how do you mask an eye like that if so?

--do you take figures apart to paint them?
Author:  BloodDrinker6969 [ Thu Nov 08, 2007 6:36 am ]
Post subject: 
Are you making a Kamala based Chaos? :lol:
Author:  pickleloaf [ Thu Nov 08, 2007 7:06 am ]
Post subject: 
BloodDrinker6969 wrote:
Are you making a Kamala based Chaos? :lol:


i am now

is there a chaos with a human like body? (i dont know all the rxh names... there is a body with a human looking chest and torn shorts)
Author:  BloodDrinker6969 [ Thu Nov 08, 2007 8:13 am ]
Post subject: 
Yes, Chaos Man. Most of them have the scarfs and are a I FART A LOT to find, but there's a handful w/o scarfs that aren't tooooooooo bad to hunt down, a fleshish-pink colored body w/green paint and one that's metallic purple. You could just swap his head and a Mutant or Evils head too if you get a cheap enough set (flesh I'm thinking.)

Than make a Papashango Ryusie, he's got the skull!
Author:  pickleloaf [ Thu Nov 08, 2007 8:42 am ]
Post subject: 
anyone want to hook me up with some cheapie flesh sets? :lol:
Author:  plover [ Thu Nov 08, 2007 8:46 am ]
Post subject: 
I'll hook you up with a Jinga-R and a Bigaro for $85 shipped.
Author:  pickleloaf [ Thu Nov 08, 2007 8:48 am ]
Post subject: 
but i want the chaos head! :lol:
Author:  plover [ Thu Nov 08, 2007 8:52 am ]
Post subject: 
Oh sorry. You just said Flesh sets so I thought you might be after a mish-mash of body parts.
Author:  pickleloaf [ Fri Nov 09, 2007 9:30 am ]
Post subject: 
so can anyone help with the painting questions? :lol:
Author:  Grizlli [ Sat Nov 10, 2007 11:05 pm ]
Post subject: 
a secret base toy toy may make a tight kamala, you can us the bag head as the tiki mask
Author:  pickleloaf [ Thu Nov 15, 2007 7:31 am ]
Post subject: 
well, i bought the flesh RXH set #2 and will make my own chaos man

i had a dream last night that i made the kamala custom made already, so hopefully i can get it to happen in reality

there is a chaos man element i think is pretty common that i am trying to work into it in a new way


so yeah... about those original questions... :?
Author:  Rich [ Thu Nov 15, 2007 3:14 pm ]
Post subject:  Re: painting questions
pickleloaf wrote:
--when you have eyes that are part of the figure's sculpt, so you paint over them with a base coat then go back and apply v-color with a small brush? if so, is it hard to keep brush strokes out of the paint?

or would you mask the eyes if you wanted the color the same?

--if the figure has glued on eyes (like some RxH), do you remove the eyes for painting or mask them? how do you mask an eye like that if so?

--do you take figures apart to paint them?


Okay so here we go..

1.) Like I said no base coat is really needed. Just do you entire job and then finish with the eyes. And if you paint v color with a brush it will take a few coats until it fully covers and holds. Paint V color with a brush can be tricky.

OR if you like the way the eyes originally are just mask them like you mentioned.

2.) NO RxH figures eyes are glued in. So if you have a chaos pop off his head and push the eye back out.

3.) Some times I take them apart and sometimes I leave them together. It all depends on if you want over spray.

No get to painting :)
Author:  pickleloaf [ Sat Nov 24, 2007 1:49 pm ]
Post subject: 
got another question

painting with v-color and got a drip on the figure's arm. since it dries so quickly, there was a rough place left. how can i smooth that place off? acetone seems to take off the black pigment but leave a clear film underneath that leaves the area still rough. do i need to strip the whole arm?
Author:  pickleloaf [ Tue Nov 27, 2007 12:11 pm ]
Post subject: 
and another question

how will v-color work on very soft vinyl... like bathtub duckie soft?
Author:  Locomoco [ Tue Nov 27, 2007 1:18 pm ]
Post subject: 
pickleloaf wrote:
and another question

how will v-color work on very soft vinyl... like bathtub duckie soft?


I would think it would stick, but I wouldn't let any kids play with it in the tub though... not sure how toxic the stuff is.
Author:  pickleloaf [ Tue Nov 27, 2007 1:21 pm ]
Post subject: 
Locomoco wrote:
pickleloaf wrote:
and another question

how will v-color work on very soft vinyl... like bathtub duckie soft?


I would think it would stick, but I wouldn't let any kids play with it in the tub though... not sure how toxic the stuff is.


it's only for me. it's a figure from this line:
Image

they are pretty soft
Author:  cometdebris [ Tue Nov 27, 2007 8:44 pm ]
Post subject: 
As long as it's vinyl, it should stick.
Author:  pickleloaf [ Tue Nov 27, 2007 8:48 pm ]
Post subject: 
cool thanks guys

what do you think about the mess-up on the hedorakun arm? is there a way to fix that or should i just strip it all and start over?
Author:  cometdebris [ Tue Nov 27, 2007 11:41 pm ]
Post subject: 
Maybe wipe off the area with some thinner until smooth. Then respray it.
Author:  pickleloaf [ Sat Dec 01, 2007 9:42 am ]
Post subject: 
new v-color question

can you get metallic colors by mixing with silver?
Author:  Rich [ Sat Dec 01, 2007 10:29 am ]
Post subject: 
pickleloaf wrote:
new v-color question

can you get metallic colors by mixing with silver?


What do you think ;)
Author:  pickleloaf [ Sat Dec 01, 2007 11:46 am ]
Post subject: 
probably, but i am hesitant to try after i wasted a whole bottle of yellow today trying to get my brown right :? :lol:
Author:  pickleloaf [ Tue Dec 18, 2007 4:20 pm ]
Post subject: 
NEW QUESTION!! YAY!!

1- ritarder (or however you spell it)

do i thin the ritarder before adding it to thinned paint? or how does that work?
Author:  gatchabert [ Tue Dec 18, 2007 5:48 pm ]
Post subject: 
pickleloaf wrote:
NEW QUESTION!! YAY!!

1- ritarder (or however you spell it)

do i thin the ritarder before adding it to thinned paint? or how does that work?


I have a comment but I'm gonna keep that one to myself...hehehe. Instead, from whatever I learned about glues and paints in college, I'm guessing this "ritarder" that pickel is talking about is an agent to slow the drying of the paint. If that's the case, then my guess is that it should be mixed in with the paint you'll be using. The amount you mix in is dependant on how slow a drying process do you need in order to achieve the effect that you want. If what this is what the "ritarder" is (aka: retardant: noun; any substance capable of reducing the speed of a given reaction), you might want to try it on something other than a toy....like say...an old record (just kidding).
Author:  Collin Shots [ Tue Dec 18, 2007 7:15 pm ]
Post subject: 
I am going way of topic here, where do you find those kinniku man figures?! they look awesome! I have a ton of MUSCLE dudes still from the eighties.

I don't know how to post pics but check out this hoodie
its still available on DigitalGravel.com you might like it

http://store01.prostores.com/digitalgra ... mplete.jpg
Page 1 of 3 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/