skullbrain.org
http://skullbrain.org/legacy/

FINISHED: custom Bandai Ultraman Max Pygmon
http://skullbrain.org/legacy/viewtopic.php?f=19&t=37830		 Page 1 of 1
Author:  ungawa222 [ Sat Jan 08, 2011 9:14 pm ]
Post subject:  FINISHED: custom Bandai Ultraman Max Pygmon
Very happy with the way this guy is coming along; should have him completed before the weekend's out. Total repaint, and I plugged in Glastic eyes; I gotta figure out how to take a really good, properly lit photo of him when he's done, to do justice to the coloration. I painted him a flat black, then slowly built up the colors by drybrushing lightened Payne's gray, turquoise, and cad yellow, topped off with Liquitex interference green, which just looks incredible and jewel-like against the black basecoat- really much richer than regular metallics.

Image
Image
Image

Not my pic, but here's what this toy looks like off the shelf:
Image

Thanks for looking!
Author:  dustin [ Sat Jan 08, 2011 10:11 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Looks like it's coming along nicely! Looking forward to seeing it finished.
Author:  Prometheum5 [ Sun Jan 09, 2011 5:39 am ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
ZOMG WARHAEMMAR!

Seriously, that looks fantastic. The Bandai sculpts just scream for this kind of attention. The eyes in particular are unreal, and really complement your paint work on the face. Is Glastic a kind of doll-eye?
Author:  ungawa222 [ Sun Jan 09, 2011 2:04 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Thanks, guys!

Yeah, Prometheum, Glastic is a brand of realistic doll eyes; I use those and another brand called Lifetouch, usually. Again, they're not done justice in the pic; I took it outside, and I think the plastic fogged up a little bit, so you can't see the detail of the irises (all the overcast daylight reflecting off the snow adds to the shot's general washed-out-ness and lack of pop, too).

I buy all my eyes from this place- they're great to deal with:
http://www.schoepferseyes.com/
Author:  dustin [ Sun Jan 09, 2011 2:44 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
ungawa222 wrote:
Thanks, guys!

Yeah, Prometheum, Glastic is a brand of realistic doll eyes; I use those and another brand called Lifetouch, usually. Again, they're not done justice in the pic; I took it outside, and I think the plastic fogged up a little bit, so you can't see the detail of the irises (all the overcast daylight reflecting off the snow adds to the shot's general washed-out-ness and lack of pop, too).

I buy all my eyes from this place- they're great to deal:
http://www.schoepferseyes.com/


Thanks for the link. Looks like they have all kinds of interesting stuff to choose from.
Author:  Prometheum5 [ Sun Jan 09, 2011 2:46 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Thanks for the info... now I want to price out adding eyes to an Eyezon or Argus! :shock:
Author:  ---NT--- [ Sun Jan 09, 2011 2:48 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Wow - that's looking fantastic! I hope you're able to figure out a camera set-up to really show it off to us!
Author:  Winu [ Sun Jan 09, 2011 6:32 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Marvelous paint application right there! I look forward to the finished product! :D
Author:  ungawa222 [ Sun Jan 09, 2011 9:15 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Alright... couldn't stand the pic I had up, the more I looked at it... also, realized that my camera's lighting function was set to "tungsten", which was to blame for some of the washout. So I took a few more snaps, and plugged 'em in above... still not fully representative of all that's going on, color-wise, but much better than before. I should be able to post shots of the fully-finished toy by mid-week or so; decided today I want to fill his legs with plaster or putty for added stability, and I'm also going to plug tiny neodymium magnets into the soles of his feet, so I can sometimes stick him to the fridge at a 90 degree angle, for fun.
Author:  Ultra999 [ Sun Jan 09, 2011 9:24 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
those eyes are a nice touch. and by "nice" i mean creepy :) mine likes to fall over at the slightest disturbance, so i understand why you'd want to weigh it down. your color scheme is a huuuge improvement over the factory colors, including the mono/stone version. let's see it standing off the side of your fridge when it's done!
Author:  ungawa222 [ Sun Jan 09, 2011 9:27 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Ultra999 wrote:
let's see it standing off the side of your fridge when it's done!


You know it! :wink: :D
Author:  TroyStith [ Thu Jan 13, 2011 7:42 am ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Looks great so far! Really looking forward to the finished piece. Like everyone else has commented on, those eyes really make this custom pop to life. Thanks for the link :)
Author:  ungawa222 [ Fri Feb 18, 2011 12:20 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
"911, what is your emergency?"
"There are Pygmon legs stuck to the side of my refrigerator!!"

Image

Image
Author:  dustin [ Fri Feb 18, 2011 12:31 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Great job on the legs and feet. Should be fun to see this piece completed and proudly displayed on the fridge.
Author:  Prometheum5 [ Fri Feb 18, 2011 12:38 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Beautiful texture work. This is going to kill when finished.
Author:  ungawa222 [ Fri Feb 25, 2011 6:38 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Image

Image

Image

My overall plan for this custom has, this evening, taken a sharp left into hardcore weirdsville...
big, fugly things are now afoot... I will keep you posted...
Author:  ungawa222 [ Wed Mar 16, 2011 3:56 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
Gave up the crazy-ass idea I had hinted at for this guy and simply finished him up for inclusion in Troy's sale; finished pics on Garamania now:
http://garamania.blogspot.com/2011/03/kaiju-collector-and-customizer-troy.html

Thanks for looking!
Author:  nefasth [ Wed Mar 16, 2011 4:24 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
ungawa222 wrote:
Image

This is mega awesome :P
Author:  ungawa222 [ Wed Mar 16, 2011 6:10 pm ]
Post subject:  Re: In-progress: custom Bandai Ultraman Max Pygmon
nefasth wrote:
This is mega awesome :P


Ha... I thought so, too... hence the crazy plan I hatched to use the figure as the head of a huge, gnarly monster. His feet were going to be cut off, and long, narrow antelope-style horns were going to be placed sprouting out of his ankles; the head was going to be mounted on the upside-down torso of a big, old Fewture toy of the turtle demon Jinmen from Devilman. It was gonna be insane. Once Troy announced the KFJ thing, though, I knew the easiest way for me to get something in quickly would be to just finish this guy off. Maybe some time down the road, if I get another one of these figures, I'll do a big mutated custom with it as the head....
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/