The supervisor would come wandering down the line and stop at your station..."Brian San, you're supposed to have finished 100 figures today! What happened to the other 60? Where did they go? この野郎、 玩具 を 盗みましたか？
| skullbrain.org http://skullbrain.org/legacy/ |
|
| Kits--what's the deal with them? http://skullbrain.org/legacy/viewtopic.php?f=3&t=531 |
Page 1 of 1 |
| Author: | creevox [ Thu Dec 22, 2005 4:30 pm ] |
| Post subject: | Kits--what's the deal with them? |
What is the deal with the Secret Base Kits? It looks like you have to carefully trim away a lot of vinyl to get them to go together. Am I right on that? Or am I just seeing things that aren't there in the pics I've seen? |
|
| Author: | hyperparasite [ Thu Dec 22, 2005 5:45 pm ] |
| Post subject: | |
Mine is still on the way, but looking at the pics, they seem exactly as you described; the extra flash from the mold opening is still attached in the raw manufactured state, and it is up to you to trim it and articulate the toy. Great labor savings measure for them, and a quirky novelty for us. Now just imagine being on an assembly line slapping together Obakes and Skullbees all day long! |
|
| Author: | vinylglowaddict [ Thu Dec 22, 2005 5:57 pm ] |
| Post subject: | |
I would be in Heaven!!!!!!!!!!!! |
|
| Author: | hyperparasite [ Thu Dec 22, 2005 6:16 pm ] |
| Post subject: | |
The supervisor would come wandering down the line and stop at your station..."Brian San, you're supposed to have finished 100 figures today! What happened to the other 60? Where did they go? この野郎、 玩具 を 盗みましたか？
|
|
| Author: | MWNO33 [ Thu Dec 22, 2005 6:18 pm ] |
| Post subject: | |
yes you need to cut away the extra and assemble them yourself. |
|
| Author: | vinylglowaddict [ Thu Dec 22, 2005 6:33 pm ] |
| Post subject: | |
haha, I would look 30 pounds heavier my first day!!!!!!!!! I would have to start on a day when something GID was being made!!!! |
|
| Author: | audiodifficulties [ Fri Dec 23, 2005 9:00 am ] |
| Post subject: | |
i have the securet base honey bee set of 3 (I picked them up before all the hype drove things to crazy extremes)... I sat down to put one together and decided it was best to not enter the venture with only an exacto knife I post pics of one over on kr.. if i can find it ill post it here.. I figure someday I'll get the nerve/effort to assemble at least one 
|
|
| Author: | hyperparasite [ Fri Dec 23, 2005 10:12 am ] |
| Post subject: | |
What was the deal? Did you find it hard to slice through the vinyl with only an X-acto blade? Did you try heating it up first before cutting? |
|
| Author: | audiodifficulties [ Fri Dec 23, 2005 10:21 am ] |
| Post subject: | |
Not only is there the massive amounts of extra vinyl to cut.. there are 6 cirular (pretty think) holes to carve into the body.. I got out my tools and just decided to wait till when I had time lol |
|
| Author: | ramos [ Fri Dec 23, 2005 10:39 am ] |
| Post subject: | |
just imagine, all these toy we collect have to be trimed and painted. lots of work on each figure. thank you to those hard working hands |
|
| Author: | Frank Kozik [ Fri Dec 23, 2005 11:04 am ] |
| Post subject: | |
those kits are super simple to assemble. trim, rub and insert. I put together the yellow clear and milky clear in about 5 seconds each. |
|
| Author: | audiodifficulties [ Fri Dec 23, 2005 11:08 am ] |
| Post subject: | |
you have alot more experience with that stuff than I do frank lol |
|
| Author: | Arin C. [ Fri Dec 23, 2005 11:51 am ] |
| Post subject: | |
Frank Kozik wrote: trim, rub and insert.. heh heh heh 
|
|
| Author: | Frank Kozik [ Fri Dec 23, 2005 11:58 am ] |
| Post subject: | |
hint: use the large 'curved' xacto blade with a big red utility handle. |
|
| Author: | creevox [ Sat Dec 24, 2005 12:46 pm ] |
| Post subject: | |
Thanks for all the info! |
|
| Author: | creevox [ Tue Jan 03, 2006 11:51 am ] |
| Post subject: | |
Well I got the courage to put one of the Glow Honey Bee kits together! Turned out great. Cutting the holes was super easy, except for the holes in the back for the wings. Every hole that needs cutting is indented so it's easy to follow. The holes in the back were just barely outlined and a lttle nerve racking. Kept worring that I was going to slip and put a huge cut in the back. But I managed. Used a hair dryer to soften the mushrooms and inserted them in the cut holes!!! |
|
| Author: | Parka [ Tue Jan 03, 2006 11:58 am ] |
| Post subject: | |
Is it a complete figure? You'll have to post some pics now 
|
|
| Author: | audiodifficulties [ Tue Jan 03, 2006 12:01 pm ] |
| Post subject: | |
the holes i the back are what made me wait lol |
|
| Author: | creevox [ Tue Jan 03, 2006 12:17 pm ] |
| Post subject: | |
Yes it's the whole figure. No missing pieces. For the holes in the back, I broke out a new blade for my x-acto. then went at the cutting process nice and slow. |
|
| Author: | bass-sb! [ Sat Jan 14, 2006 3:00 pm ] |
| Post subject: | |
My hands are cut to hell making these things up!! Doen the gid and the clear red but my hands are too sore to finish off the grey  Maybe tomorrow
Colin |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|