skullbrain.org
http://skullbrain.org/legacy/

Detolf
http://skullbrain.org/legacy/viewtopic.php?f=5&t=10660		 Page 1 of 1
Author:  Count [ Mon May 14, 2007 7:55 pm ]
Post subject:  Detolf
Just wondering if anyhone has come up with any bright ideas for raising the shelves on a Detolf, other than re-welding them?
Author:  kidclam [ Mon May 14, 2007 7:58 pm ]
Post subject: 
check Franks post of his studio. he has some bottom shelves so that his Detolf's are higher up.

edit: oh you mean the actual shelves... sorry
Author:  jocappy [ Mon May 14, 2007 8:04 pm ]
Post subject: 
risers make a world of differance.
Author:  Count [ Mon May 14, 2007 8:12 pm ]
Post subject: 
I have risers coming out of my ass, what I need to do is raise the bottom shelf so I can fit something tall in, but I don't want to take the shelf out completely, nawmean?
Author:  DYBBUKIM [ Mon May 14, 2007 8:52 pm ]
Post subject: 
Count wrote:
I have risers coming out of my ass, what I need to do is raise the bottom shelf so I can fit something tall in, but I don't want to take the shelf out completely, nawmean?


Here's what you need:
Image
Author:  kidclam [ Mon May 14, 2007 9:50 pm ]
Post subject: 
DYBBUKIM wrote:
Count wrote:
I have risers coming out of my ass, what I need to do is raise the bottom shelf so I can fit something tall in, but I don't want to take the shelf out completely, nawmean?


Here's what you need:
Image


lol
Author:  jocappy [ Mon May 14, 2007 10:55 pm ]
Post subject: 
Count wrote:
I have risers coming out of my ass, what I need to do is raise the bottom shelf so I can fit something tall in, but I don't want to take the shelf out completely, nawmean?


It probably would cost as much as the detolf or more, but take the detolf apart, go to a metal fab place with the metal shelf holder deal thing, and have them make one with the spaces farther apart.

OR break the welds and raise the bottom shelf and reweld. (not easy ;) )
Author:  Anti Social Andy [ Tue May 15, 2007 12:24 am ]
Post subject: 
jocappy wrote:
OR break the welds and raise the bottom shelf and reweld. (not easy ;) )


That's what Ungawa did to fit his bigg ass monsters in . . . he only posted pics in the last few weeks.
Author:  ungawa222 [ Tue May 15, 2007 4:58 am ]
Post subject: 
Scary Andy wrote:
jocappy wrote:
OR break the welds and raise the bottom shelf and reweld. (not easy ;) )


That's what Ungawa did to fit his bigg ass monsters in . . . he only posted pics in the last few weeks.


I have a super-nice blacksmith/welder neighbor, tho.... :D
Author:  Anti Social Andy [ Tue May 15, 2007 8:10 am ]
Post subject: 
ungawa222 wrote:
I have a super-nice blacksmith/welder neighbor, tho.... :D


Always helps! :D
Author:  Frank Kozik [ Tue May 15, 2007 11:39 am ]
Post subject: 
take 4 zip ties and attache them to the hiegth you want and snug them around the vertical poles. clip of the excess. take 2 pieces of wire and make an X and tie them off above the zip ties, neatly trim the excess. snug the wire ends down so the rest ON TOP of the zip tie collars. place glass on the wire.

presto.

time: 5 minutes

cost: 3 dollars or less.
Author:  jocappy [ Tue May 15, 2007 12:00 pm ]
Post subject: 
Frank Kozik wrote:
take 4 zip ties and attache them to the hiegth you want and snug them around the vertical poles. clip of the excess. take 2 pieces of wire and make an X and tie them off above the zip ties, neatly trim the excess. snug the wire ends down so the rest ON TOP of the zip tie collars. place glass on the wire.

presto.

time: 5 minutes

cost: 3 dollars or less.


Frank, you forgot

... priceless....

great idea, that would work well....
Author:  efp3 [ Tue May 15, 2007 12:23 pm ]
Post subject: 
Quick, patent that! :D
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/