skullbrain.org
http://skullbrain.org/legacy/

SHAG vinyl
http://skullbrain.org/legacy/viewtopic.php?f=6&t=34019		 Page 1 of 2
Author:  GERMS [ Wed Feb 17, 2010 7:24 pm ]
Post subject:  SHAG vinyl
Image
Image
Image
Image

love the car
Author:  animator [ Wed Feb 17, 2010 7:30 pm ]
Post subject:  Re: SHAG vinyl
Been loving this since I saw it on rotofugi. Not sure if I'll get one yet or not though, there are so many toy releases right now. Plus the "prototype edition" leads me to think more will be made.
Author:  lurker [ Wed Feb 17, 2010 7:35 pm ]
Post subject:  Re: SHAG vinyl
I dig SHAGS work and the toy is cool but I don't forsee myself ever buying one.

at any rate I thought the quote in the chicagoist article that kirby tweeted was funny...

"The toy runs at a steep $75, but for enthusiasts this is certainly reasonable."
Author:  uberboy [ Wed Feb 17, 2010 7:36 pm ]
Post subject:  Re: SHAG vinyl
yeah, it works for me. cartoon-like yet adult enough in subject matter that the original reference to shriners in their tiny cars would be lost on a child. in my opinion, a lot of western vinyl and its "appealing" attributes can be understood by a ten year old. not to say that ten years old have bad taste, but they do tend to eagerly consume massively-derivative content as if it were as valid as the original content that created whatever trend is being bought.

in other words, i'd almost buy it.
Author:  locomoto566 [ Wed Feb 17, 2010 7:38 pm ]
Post subject:  Re: SHAG vinyl
I'd be down for one if it were a remote controlled car.
Author:  bannedindc [ Wed Feb 17, 2010 7:47 pm ]
Post subject:  Re: SHAG vinyl
I love this. hear me kirby?
I LOVE THIS.
I don't love anything.
I love this.
real talk:
<3
Author:  Kevlo9 [ Wed Feb 17, 2010 7:52 pm ]
Post subject:  Re: SHAG vinyl
I like this, but curious on the size.
Author:  Punkin Donuts [ Wed Feb 17, 2010 8:38 pm ]
Post subject:  Re: SHAG vinyl
Kevlo9 wrote:
I like this, but curious on the size.


According to VP: The medium-sized figure (6.25” tall, 7.25” long) features three-points of articulation (wrist and shoulder of beverage arm, neck/head).

I love it. I won't be picking it up, but I think it translated well from canvas to vinyl.
Author:  m3kcomp [ Wed Feb 17, 2010 11:25 pm ]
Post subject:  Re: SHAG vinyl
not big on Shag, but this toy looks pretty good...shriner's are always cool.
Author:  nefasth [ Thu Feb 18, 2010 5:53 am ]
Post subject:  Re: SHAG vinyl
I did'nt really like Shag's other toys (Flank was too hip, pirates too Disney). I'm surprised they choose this image to make into toy and I think it's a cool idea. I'll try to get one.
Author:  KJB [ Thu Feb 18, 2010 6:34 am ]
Post subject:  Re: SHAG vinyl
Don't know if it's just the photos, but it looks more like cheap plastic than vinyl - the sort of thing you'd get at Target or Spencer's Gifts for five bucks. Too, while I love Shag's artwork (and the good people at Roto), there's something about Shag's design sensibility that doesn't translate exceptionally well to 3D.
Author:  JoeMan [ Thu Feb 18, 2010 8:56 am ]
Post subject:  Re: SHAG vinyl
I'll pile on my admiration for this toy. It looks great. I want one.
Author:  rotokirby [ Thu Feb 18, 2010 10:47 am ]
Post subject:  Re: SHAG vinyl
Thanks guys.

It is indeed vinyl...my lights were a little hot in these photos so it came off a little shiny.

The "Prototype: in the name refers really to two things....

1) It's the first release and from the master molds rather than duplicate molds so it'll be a little larger than the regular and subsequent releases

and

2) There's still a few things we want to correct paint and finish wise for the next releases. I'm really happy with how this project turned out, and we wanted to have a release for Shag's opening in our gallery but there's still room to make this a better figure.

Josh (Shag) was super cool to work with on this and I'm really hoping people love it so we can release some of the other color combos (and maybe even different characters) that we're hoping to do.
Author:  atease [ Thu Feb 18, 2010 11:09 am ]
Post subject:  Re: SHAG vinyl
rotokirby wrote:
Thanks guys.

It is indeed vinyl...my lights were a little hot in these photos so it came off a little shiny.

The "Prototype: in the name refers really to two things....

1) It's the first release and from the master molds rather than duplicate molds so it'll be a little larger than the regular and subsequent releases

and

2) There's still a few things we want to correct paint and finish wise for the next releases. I'm really happy with how this project turned out, and we wanted to have a release for Shag's opening in our gallery but there's still room to make this a better figure.

Josh (Shag) was super cool to work with on this and I'm really hoping people love it so we can release some of the other color combos (and maybe even different characters) that we're hoping to do.


can I submit suggestions for characters? I own quite a bit of shag stuff and would love to see certain characters from past paintings and prints in vinyl form.

This guy is really great in my opinion. For anyone who has followed his work for any length of time, a toy shriner is absolutely perfect as it's such a continuous theme. I picked up the Black/Grey Flank a while back and the quality of it is pretty stellar, I'm sure the rotos did a great job with this one as well.

good luck with the show kirby. the print selection looks great...you got quite a few of the older (better) releases I noticed.
Author:  Pogue [ Thu Feb 18, 2010 11:15 am ]
Post subject:  Re: SHAG vinyl
I love this figure too. Well done Roto!
Author:  Robert DeCastro [ Thu Feb 18, 2010 11:32 am ]
Post subject:  Re: SHAG vinyl
KJB wrote:
Don't know if it's just the photos, but it looks more like cheap plastic than vinyl - the sort of thing you'd get at Target or Spencer's Gifts for five bucks. Too, while I love Shag's artwork (and the good people at Roto), there's something about Shag's design sensibility that doesn't translate exceptionally well to 3D.


I really have to start shopping at Spencers. :lol:
Author:  animator [ Thu Feb 18, 2010 12:15 pm ]
Post subject:  Re: SHAG vinyl
I'm hoping for a flocked jacket and hat version.
Author:  rotokirby [ Thu Feb 18, 2010 1:14 pm ]
Post subject:  Re: SHAG vinyl
To be honest, I hate flocking so I don't know if it will happen or not. So much can go wrong with flocked toys from both a manufacturing and a display standpoint.

That said, there's one version I have in mind that would look great with a flocked hat at least.
Author:  Greasebat [ Thu Feb 18, 2010 11:06 pm ]
Post subject:  Re: SHAG vinyl
Longtime Shag fan...I have several prints hangin' in my home, including a huge one in the main room over the fireplace.

I think this rules, I hope it does well so more stuff comes out. I would like a Shag wolfman toy!
Author:  damaged Bryan [ Fri Feb 19, 2010 11:15 am ]
Post subject:  Re: SHAG vinyl
Looking forward to seeing it live and in person tonight, sadly no job=no shriners!
Author:  onibaba5 [ Fri Feb 19, 2010 12:06 pm ]
Post subject:  Re: SHAG vinyl
Nice Job and congrats Kirby.
Author:  damaged Bryan [ Sat Feb 20, 2010 9:17 am ]
Post subject:  Re: SHAG vinyl
In hand this guy is killer. He doesn't really fit with anything else I own, but the wife saw it last night and we just had to have it. Shag was really cool and now mine has a martini hood ornament.
Author:  KJB [ Sat Feb 20, 2010 11:44 am ]
Post subject:  Re: SHAG vinyl
Yeah, I met him at ComicCon a few years back and he was super nice - did a sketch for some friends of mine who have a 50's-60's themed vinatge store and love his stuff. Wish I could afford one of the originals at the Roto show.
Author:  AladdinSane [ Sat Feb 20, 2010 1:08 pm ]
Post subject:  Re: SHAG vinyl
It's up now if anyone is looking for it. Picked it up. Was pretty impressed with the transition from 2d to 3d.
Author:  nefasth [ Sat Feb 20, 2010 2:17 pm ]
Post subject:  Re: SHAG vinyl
! I got one !
Did they sell well at the show ?
Page 1 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/